Plasma Cutting Thickness: Recommended Cut, Pierce and Severance
Choose a plasma cutter for the quality and production speed your job requires. A maximum separation thickness does not describe the edge quality or throughput available in daily production.
Ask what the thickness rating actually measures
Keep recommended cutting, production cutting, piercing and severance separate. A clean-cut claim needs an agreed edge-quality criterion, material, speed and test setup. A hand-severance claim describes separation under its stated conditions. A pierce limit concerns starting through the plate; it is not the same as starting from an edge.
Compare equivalent cutting conditions
Use the manufacturer cut chart for the exact power source, torch, consumables and material. Compare ratings only when their speed, edge-quality criteria and starting method are comparable. A severance figure describes separation under its stated conditions; it cannot establish routine production quality or a CNC piercing limit.
Build a useful cutter specification
State the alloy, routine and occasional thickness, required edge condition, acceptable dross and angularity, travel speed, hand or CNC operation, edge-start or piercing, and daily cutting time. Then confirm the exact torch, consumable, clean dry gas supply, electrical input and duty cycle. Ask for a timed sample cut on your material before accepting a clean-cut promise.
Will every 60 A or 100 A cutter cut the same thickness?
Current alone does not establish comparable performance. Obtain a material-specific cut chart and verify the torch, consumables, gas, speed and acceptance criteria for the exact model.
Can the maximum cut thickness be used as the CNC pierce rating?
Use the manufacturer's explicit pierce rating and torch-height requirements. Starting from an edge and piercing through the plate impose different conditions.
What clean-cut thickness can COSTAR guarantee?
Request the exact model's verified cut chart or an agreed sample test. The reference examples on this page do not establish a COSTAR clean-cut guarantee.
References and application limits
The manufacturer and technical references below provide general background. Their product examples are not COSTAR specifications. Select equipment using the exact model documentation and an agreed application test.